PRICE LIST


1" Pegs

3/4" Pegs

1 1/4" Pegs

Points

Other Pegs

Chisel Handles
(click to see full size with labels)

Red Oak, Ash, or Hard Maple Pegs (Double Chamfers add 0.05 each) Less than 200 200-499 500-999 1000 or more
3/4", 7/8", 1" x 6" straight 0.55 0.50 0.45 0.40
3/4", 7/8", 1" x 8" straight 0.65 0.60 0.55 0.50
3/4", 7/8", 1" x 10" straight 0.80 0.70 0.65 0.60
3/4", 7/8", 1" x 12" straight 0.90 0.80 0.75 0.70
3/4", 7/8", 1" x 14" straight 1.10 0.95 0.90 0.85
3/4", 7/8", 1" x 16" straight 1.35 1.20 1.10 1.05
1 1/8" or 1 1/4" x 12" straight 2.00 1.60 1.40 1.25
1 1/2" x 12" straight 2.50 2.25 2.00 1.85
2" x 12" straight 3.50 3.20 2.95 2.75
 
White Oak or Locust Pegs (Double Chamfer adds 0.05 each) Less than 200 200-499 500-999 1000 or more
3/4", 7/8", 1" x 6" straight 0.67 0.62 0.57 0.52
3/4", 7/8", 1" x 8" straight 0.81 0.76 0.71 0.66
3/4", 7/8", 1" x 10" straight 1.00 0.90 0.85 0.80
3/4", 7/8", 1" x 12" straight 1.15 1.05 1.00 0.95
 
Tapered or Drawbore Pegs Less than 200 200-499 500-999 1000 or more
3/4", 7/8" x 12" tapered or drawbore - Red Oak or Ash 0.95 0.85 0.80 0.75
1" x 12" tapered or drawbore - Red Oak or Ash 1.20 1.10 1.05 1.00
1" x 16" drawbore - Red Oak 1.50 1.40 1.30 1.20
3/4", 7/8" x 12" tapered or drawbore - White Oak or Locust 1.20 1.10 1.05 1.00
1" x 12" tapered or drawbore - White Oak or Locust 1.50 1.40 1.35 1.30

Black locust trunnels for boat building or restoration are available on request

Call for prices on black locust and black walnut pegs.
Straight pegs are turned approximately 1/64" oversize
Double chamfered pegs have a decorative 45 degree chamfer on either end.
Tapered pegs are 1/64" over the measurement, tapered to 1/64" under.
Drawbore pegs are like tapered pegs, but the first 3" is sharply tapered to 5/8" diameter.

Other sizes available upon request.  We can also turn your stock, if you prefer to supply your own.
All prices are f.o.b. Walpole, NH.